Hello
Sorry if somebody had already discussed this topics but i do not read German and after several hours of search I've preferred to open a new topic
I have a SRP-2100 receiver and i trying to use it again after few years of storage. Unfortunately the present transponder frequencies set up for Eutelsat 5W do not correspond to new frequencies used by the satellite operator for my package (BISTV).
I would like to modify the transponder frequencies for Eutelsat 5W to fit new frequencies.
I've downloaded software Set Top but do not supported SRP-2100, software Vega is for only old Windows OS.
I don't know what to do now! Is there anybody who could give some direction?
Thank you for your help.
Transponder frequency modification
AW: Transponder frequency modification
Set the frequencies with your remote control using the keys 0 to 9.
Viele Grüße
Homer
Viele Grüße
Homer
rettet-das-freetv.de 
Project Euler 2401 Urban Priol ist ein smarter Androide und kann keine TAPs.
TF5200PVRc (HA250JC)
TAPs: BootMenu - UsbAccelerator - [thread=49960]acaderc_5k[/thread] - RemoteSwitch - Automove V1.9 final [90] (18.04.2008) - TF5000Display - 3PG - IdleHDD
CRP-2401CI+ (ST3500312CS,MZ-75E500B)
TAPs: XStartTap_TMS - AutoReboot - RemoteSwitch_TMS - RescueRecs - SmartEPG_TMS - RebuildNAV - Automove V2.0 beta 13 (24.05.2011) - StartFTPd - TMSRemote - NiceDisplay
KabelBW Unitymedia (free to air)
Project Euler 2401 Urban Priol ist ein smarter Androide und kann keine TAPs.TF5200PVRc (HA250JC)
TAPs: BootMenu - UsbAccelerator - [thread=49960]acaderc_5k[/thread] - RemoteSwitch - Automove V1.9 final [90] (18.04.2008) - TF5000Display - 3PG - IdleHDD
CRP-2401CI+ (ST3500312CS,MZ-75E500B)
TAPs: XStartTap_TMS - AutoReboot - RemoteSwitch_TMS - RescueRecs - SmartEPG_TMS - RebuildNAV - Automove V2.0 beta 13 (24.05.2011) - StartFTPd - TMSRemote - NiceDisplay
AW: Transponder frequency modification
You could also use the TAP ChannelListSaver to edit Transponder Lists on your PC.
Meine aktuellen TAPs: MovieCutter | ChannelListSaver | RecStripper | TAPtoDate | HDDIntegrityAW: Transponder frequency modification
[quote="Homer"]Set the frequencies with your remote control using the keys 0 to 9.
Viele Grüße
Homer[/quote]
Hello
Sorry for this late answer. Thank you for your help.
I tried to find a menu which allow me to change frequencies but on my SRP-2100 but no way to modify transponder frequencies values by remote control keys.
Thank you for your help.
Best regards.
Laurent Kervaut
AW: Transponder frequency modification
Yes there is.
Go to the channel search menu. Select manual search. Change to the frequency field. DON'T PRESS OK, but simply start typing the frequency using the number keys of the remote control. Adjust the remaining settings according to the desired transponder. Start search.
Go to the channel search menu. Select manual search. Change to the frequency field. DON'T PRESS OK, but simply start typing the frequency using the number keys of the remote control. Adjust the remaining settings according to the desired transponder. Start search.
AW: Transponder frequency modification
Homer hat geschrieben:Set the frequencies with your remote control using the keys 0 to 9.
Viele Grüße
Homer
Anthea hat geschrieben:Yes there is.
Go to the channel search menu. Select manual search. Change to the frequency field. DON'T PRESS OK, but simply start typing the frequency using the number keys of the remote control. Adjust the remaining settings according to the desired transponder. Start search.
Hello
I've finally find out the procedure with your help. Thank you very much.